PENGARUH PENAMBAHAN SERAT MICRO FIBER TERHADAP KUAT TEKAN DAN KUAT TARIK BELAH BETON

M.Ikbal, NIM. 112021046 (2026) PENGARUH PENAMBAHAN SERAT MICRO FIBER TERHADAP KUAT TEKAN DAN KUAT TARIK BELAH BETON. Skripsi thesis, Universitas Muhammdiyah Palembang.

[img]
Preview
Text
112021046_bab i_daftar pustaka (2).pdf - Published Version

Download (2MB) | Preview
[img] Text
112021046_BAB II.pdf - Published Version
Restricted to Repository staff only

Download (439kB)
[img] Text
112021046_BAB III.pdf - Published Version
Restricted to Repository staff only

Download (702kB)
[img] Text
112021046_BAB IV.pdf - Published Version
Restricted to Repository staff only

Download (716kB)
[img] Text
112021046_BAB V.pdf - Published Version
Restricted to Repository staff only

Download (179kB)
[img] Text
112021046_DAFTAR PUSTAKA.pdf - Published Version
Restricted to Repository staff only

Download (198kB)
[img] Text
112021046_LAMPIRAN.pdf - Published Version
Restricted to Repository staff only

Download (4MB)
[img] Text
112021046_cover_sampai_terakhir.pdf - Published Version
Restricted to Repository staff only

Download (8MB)

Abstract

This study aims to determine the effect of adding microfiber fibers on the compressive strength and splitting tensile strength of concrete. Concrete is a construction material that has strength against compressive forces but is weak against tensile forces. The use of microfiber as an additional material aims to increase the tensile strength of concrete so that it can overcome this weakness. The research method used was experimental testing in a laboratory using cylindrical test specimens measuring 150 mm x 300 mm. The variations in microfibe addition used were 0kg/m3 , 0,1kg/m3 , 0,2kg/m3 , 0,3kg/m3 , 0,4kg/m3 of the concrete volume. Each variation consisted of three test specimens and was tested at 28 days of age. The results of this study show that the addition of micro fiber to the concrete mixture with a variation of 0,4kg/m3 obtained the highest compressive strength of 28,11 MPa. The splitting tensile strength with a variation of 0,4kg/m3 obtained an optimum value of 2.08 MPa. This study concludes that adding Microfiber to concrete mixtures can improve concrete performance when used in the right proportions.

Item Type: Thesis (Skripsi)
Additional Information: Ir. Erny Agusri, M.T. Adji Sutama, S.T., M.T.
Uncontrolled Keywords: Micro Fiber, Concrete Compressive Strength, Concrete Splitting Tensile Strength
Subjects: Teknik Sipil > Teknik Struktural
Divisions: Fakultas Teknik > Teknik Sipil (S1)
Depositing User: Mahasiswa Fakultas Teknik
Date Deposited: 11 May 2026 03:53
Last Modified: 11 May 2026 03:53
URI: http://repository.um-palembang.ac.id/id/eprint/36072

Actions (login required)

View Item View Item

is powered by EPrints 3 which is developed by the School of Electronics and Computer Science at the University of Southampton. More information and software credits.