PENGARUH PENAMBAHAN SERAT KACA (FIBERGLASS) TERHADAP KUAT TEKAN DAN KUAT TARIK BELAH BETON

MUHAMMAD DHIMAS GUSTI NANDA, NIM. 112021049 (2025) PENGARUH PENAMBAHAN SERAT KACA (FIBERGLASS) TERHADAP KUAT TEKAN DAN KUAT TARIK BELAH BETON. Skripsi thesis, Universitas Muhammadiyah Palembang.

[img]
Preview
Text
112021049_BAB 1_DAFTAR PUSTAKA.pdf - Published Version

Download (4MB) | Preview
[img] Text
112021049_BAB II.pdf - Published Version
Restricted to Repository staff only

Download (5MB)
[img] Text
112021049_BAB III.pdf - Published Version
Restricted to Repository staff only

Download (4MB)
[img] Text
112021049_BAB IV.pdf - Published Version
Restricted to Repository staff only

Download (6MB)
[img] Text
112021049_BAB V.pdf - Published Version
Restricted to Repository staff only

Download (413kB)
[img] Text
112021049_DAFTAR PUSTAKA.pdf - Published Version
Restricted to Repository staff only

Download (477kB)
[img] Text
112021049_LAMPIRAN.pdf - Published Version
Restricted to Repository staff only

Download (13MB)
[img] Text
112021049_Cover_Sampai_Lampiran.pdf - Published Version
Restricted to Repository staff only

Download (35MB)

Abstract

This study aims to determine the effect of adding fiberglass fibers on the compressive strength and splitting tensile strength of concrete. Concrete is a construction material that has strength against compressive forces but is weak against tensile forces. The use of fiberglass as an additional material aims to increase the tensile strength of concrete so that it can overcome this weakness. The research method used was experimental testing in a laboratory using cylindrical test specimens measuring 150 mm x 300 mm. The variations in fiberglass fiber addition used were 0.25%, 0.50%, 0.75%, and 1% of the cement weight. Each variation consisted of three test specimens and was tested at 28 days of age. The results of this study show that the addition of fiberglass to the concrete mixture with a variation of 0.50% obtained the highest compressive strength of 27,82 MPa. The splitting tensile strength with a variation of 1% obtained an optimum value of 2.13 MPa. This study concludes that adding fiberglass fibers to concrete mixtures can improve concrete performance when used in the right proportions.

Item Type: Thesis (Skripsi)
Additional Information: Pembimbing 1 : Ir. Erny Agusri, M. T. 2 : Adji Sutama, S. T., M. T.
Uncontrolled Keywords: Fiberglass. Concrete Compressive Strength, Concrete Splitting Tensile Strength
Subjects: Teknik Sipil > Bahan-bahan Bangunan
Divisions: Fakultas Teknik > Teknik Sipil (S1)
Depositing User: Mahasiswa Fakultas Teknik
Date Deposited: 06 May 2026 07:28
Last Modified: 06 May 2026 07:28
URI: http://repository.um-palembang.ac.id/id/eprint/35760

Actions (login required)

View Item View Item

is powered by EPrints 3 which is developed by the School of Electronics and Computer Science at the University of Southampton. More information and software credits.